I done over 13k in my x5 on b100 with no problems at all. The car had 134k on it when I bought it too.

Yes the BMW scanner software can switch off the bulb check light. Mine used to flash the warning but both bulbs were working fine so I just switched the check light off.

I just used one of the eBay kits. It was my level sensors which were faulty so I sold the compressor and air bags on ebay afterwards and that paid for the kit 

I converted the rear of my x5 to coil springs a few months ago. I removed everything to do with the air suspension and switched off the dash error with the BMW scanner software. The car has been spot on since.

Bottled water? )

Well thats me just finished. Car feels good to drive and the handling is much better with it sitting at the correct height again. Ive got loads of pics taken so i'll get started on a step by step how to guide for anyone interested.

Done it myself with the bmw scanner software :thumbup:

I wasnt planning on doing a "How To" but I could if it will help anyone else out. Ive still got the second side to do tomorrow so I could take step by step pics etc then.

Started doing this conversion to coil springs earlier on today and its been going pretty well. Ive got one side complete and i'll do the other tomorrow as my knees and back were starting to stiffen up :( Ive already coded out the "susp inact" error on the dash as well. Looking forward to driving the ...

hmm well thinking about it being an abs problem, i washed the wheels as well yesterday and was right in about the inside of the wheels. I could have disturbed one of the sensors. Ive took the car another drive and all the lights are off, then as soon as i drive the abs dsc and brake light all come ...

nothing happens when the dsc button is pressed. if i clear the codes and start the car up everything is fine. as soon as I drive off "dsc deactivated" or something along those lines flashes up on the dash. The dsc and abs lights stay illuminated.

Hey guys, the dsc on my 02 x5 is playing up. Ive hooked up my bmw scanner and all that comes up is the following message "090 temporary system deactivation" Can anyone shed some light on this for me please? I changed the glow plugs on the car yesterday and the it was totally fine before that, but as ...

Its the bmw 1.4.0 scanner im using. 2here is the front acoustic generator located so i can check it out? And i take it i'll need to remove the speedo to try and plug the ike transmitter back in?

Decided to buy one of these BMW scanners and it arrived today. Brilliant bit of kit for the money. Managed to narrow down the pdc problem I have and here are the errors: PDC -> 13/C4 - Converter, rear centre right 22/C6 - Acoustic generator, front, off I also have this error which im not sure if it ...

[quote=""Raj""]Fitting isn't an issue. Was just more checking that they would fit my 4.8 for sure.[/quote]

I was replying to the guy who posted before you asking if they were hard to fit.